600W Mean Well SE-600 single output power supply
- Buy 96 for $52.95 each and save 7%
- Buy 1008 for $49.95 each and save 12%
Click here to view the SE-600 detailed specifications and operating manual
We are the distributor of Mean Well power supplies, genuine version, not cheap copycat
AC input active surge current limiting
Protections:Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
High power density 4.9w/inch
Built-in remote sense function
UL approved
Low cost
2 years warranty
Output
DC voltage: DC 5V (SE-600-5), 12V (SE-600-12, default), 15V (SE-600-15), 24V (SE-600-24), 27V (SE-600-27), 36V (SE-600-36), 48V (SE-600-48)
Rated current: 50/25A
Current range: 0~50A/0~25A
Rated power: 600W
Ripple & noise (max.): 150mVp-p
Voltage ADJ. range: 10~13.5V/20~26.4V
Voltage tolerance: ±1.0%
Line regulation: ±0.5%
Load regulation: ±0.5%
Setup, rise time: 1000ms, 50ms/230V AC 1000ms,50ms/115V AC at full load
Hold up time (Typ.): 20ms/230VAC 16ms/115VAC at full load
Input
Voltage range: 90~132V AC/180~264V AC by switch 254~370VDC
Frequency range: 47~63Hz
Efficieny (Typ.): 83%/87%
AC current (Typ.): 12A/115VAC 7.5A/230VAC
Inrush current (Typ.): 30A/115VAC 60A/230VAC
Leakage current: <2.0mA / 240VAC
Over load: 105 ~ 125% rated output power, Protection type : Shut down o/p voltage, re-power on to recover
Over voltage: 13.8 ~ 16.2V/27.6 ~ 32.4V Protection type :Shut down O/P voltage, re-power on to recover
Over temperature: 80~90 celsius (TSW1) detect on heatsink of power transistor Protection type : Shut down O/P voltage, recovers automatically after temperature goes down
Working TEMP.: -20 ~ +60 celsius (Refer to "Derating Curve")
Workking humidity: 20 ~ 90% RH non-condensing
Storage TEMP., humidity: -40 ~ +85 celsius, 10 ~ 95% RH
TEMP. coefficient: ±0.05%/ (0 ~ 50 clesius)
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety standards: UL60950-1 approved
Withstand voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH
MTBF: 197K hrs min. MIL-HDBK-217F (25celsius)
Dimension: 247*127*63.5mm (L*W*H)
Packing: 2.1Kg; 6pcs/13.4Kg/1.03CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 celsius of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
